Drop your Gerbers. See your board.

Upload the zip your PCB tool exports. Your board is drawn here from its own files, measured, its layers and holes counted, then priced for the quantity you need.

A .zip of Gerber and drill files, or the files themselves. Nothing is uploaded until you ask for the price.

Copper tracks and pads on a green board, lit from behind

What we make

Rigid FR-4 boards, plated through, from a first prototype to a thousand boards a run.

Copper layers1, 2, 4, 6, 8, 10, 12 or 14
Board sizeFrom 5 × 5 mm to 500 × 500 mm
QuantityFrom 1 board; up to 1,000 priced here
Thickness0.8, 1.0, 1.2, 1.6 or 2.0 mm
Track and gapDown to 0.1 mm
Smallest hole0.2 mm drilled, plated through
Surface finishLead-free HASL or ENIG gold
Gold plated holes and tracks on a green board, close up
Plated-through holes: copper runs down the inside of each hole to join the layers.
A fan of small test boards in different solder mask colours
The same board in each solder mask colour.

Five mask colours

Green is the default. Black, blue and red keep the same detail; white boards get a black legend.

  • Green
  • Black
  • Blue
  • Red
  • White

Files we need

Export Gerber RS-274X and Excellon drill files from your PCB tool and put them in one zip. These are the names we read.

FileWhat it holdsNames
CopperOne file per copper layerF_Cu, B_Cu, In1_Cu · .GTL, .GBL, .G1
Solder maskWhere the pads stay bareF_Mask, B_Mask · .GTS, .GBS
LegendLabels and outlines printed on topF_Silkscreen, B_Silkscreen · .GTO, .GBO
Board outlineThe shape the board is cut toEdge_Cuts · .GKO, .GM1
DrillEvery hole and its sizeExcellon · .DRL, .XLN
A bare green board with its pads and legend, before any parts are fitted
A bare board as it arrives: every layer from the zip, in copper, mask and ink.
Prototype boards in green, red, blue and gold laid over each other
Prototype boards, each made from its own set of Gerbers.

From Gerbers to your bench

  1. Upload

    The zip is read as you saw above: layers, size and holes. Ask for the price and your files come with the order.

  2. Check

    Before anything is made, the files are checked for tracks, gaps and holes below what can be made, and you hear about it first.

  3. Make

    Copper is etched, holes drilled and plated, the mask and legend printed, and every board tested and cut out.

  4. Ship

    Boards are packed flat with tracking. Your quotes and orders stay in your account.

Before you upload

An assembled board with chips, relays and green terminal blocks
An assembled board: send the parts list with the Gerbers.
Which files do you need?

Gerber files for every copper, mask and legend layer, the board outline and the Excellon drill file, together in one zip. KiCad, Altium, Eagle and EasyEDA all export them.

Why do I need to sign in to see the price?

Prices are worked out for your account. Drawing and measuring the board works without signing in; the price needs an account.

Why does my board need a quote by hand?

Boards smaller than 5 mm or larger than 500 mm, layer counts other than 1, 2, 4 to 14, and orders over 1,000 boards are priced by a person. Send the zip through the contact page.

Do you assemble the boards too?

Send the bill of materials and the pick-and-place file with your Gerbers through the contact page, and say how many boards to assemble.

Does the colour change the price?

The preview shows the colours to choose from. Say which one you want when you order.

Are my files kept private?

They are used to price and make your order and stay in your account. The privacy policy says how long they are kept.

Gerbers ready?

Ask us first

Pictures from Wikimedia Commons: Green circuit board II, Peter Shanks, CC BY 2.0; Plated-through holes on an electronic circuit board, G1MFG, CC BY-SA 4.0; PCB Color Samples, Thomas Flummer, CC BY-SA 4.0; Aurora 2ch mixer board arrived, c-g., CC BY 2.0; PCB Prototypes, Mister rf, CC BY-SA 4.0; MDT AKD-0401.02 circuit board, Phiarc, CC BY-SA 4.0.